What is a risk assessment, what is it for, and is it a legal requirement?

What a risk assessment is, its purpose, the difference between a hazard and a risk, and the law that requires employers to carry one out, from HSE guidance.

Last reviewed 3 min readBy Lift College Editorial

CPD guide

A risk assessment identifies what in your work could cause injury or illness (the hazards), works out how likely it is that someone could be harmed and how seriously, and sets out what you will do to remove the hazard or control the risk. Under the Management of Health and Safety at Work Regulations 1999, every employer must make a suitable and sufficient assessment of the risks to employees and to anyone else affected by their work. The Health and Safety Executive (HSE) says assessing risk is one part of the overall process used to control risks in your workplace. The Lift College Risk Assessment Training course covers each step.

Watch: What Is a Risk Assessment, and Is It a Legal Requirement?2 min 32 s · Lift College on YouTube

Hazard and risk

HSE uses two words:

  • a hazard is anything that may cause harm, such as chemicals or manual handling
  • the risk is how likely it is that someone could be harmed by the hazard, and how seriously

The purpose of a risk assessment

Regulation 3 says the assessment is for identifying the measures an employer needs to take to comply with health and safety law. HSE puts the minimum you must do in three parts:

  • identify what could cause injury or illness in your business
  • decide how likely it is that someone could be harmed and how seriously
  • take action to eliminate the hazard, or if this is not possible, control the risk

Do you have to write it down?

Where an employer has 5 or more employees, regulation 3(6) says they must record the significant findings of the assessment and any group of employees identified as especially at risk. HSE adds that you should not rely purely on paperwork: the priority is to control the risks in practice.

Other risk assessments

Some risks have their own rules and guidance, including fire, hazardous substances under COSHH and legionella in water systems. See our guides to fire risk assessment steps, dynamic risk assessment and legionella risk assessment.

Training

Lift College Risk Assessment Training is 2 hours in 5 modules, for managers, supervisors and staff who carry out risk assessments, with a CPD Standards Office accredited certificate the same day you pass.

Frequently asked questions

What is a risk assessment in simple terms?
A check of what at work could cause injury or illness, how likely and serious the harm could be, and what you will do to remove the hazard or control the risk.
What is the purpose of a risk assessment?
To identify the measures needed to protect people and comply with health and safety law, as regulation 3 of the Management of Health and Safety at Work Regulations 1999 sets out.
Is a risk assessment a legal requirement?
Yes for employers. Every employer must make a suitable and sufficient assessment of the risks to employees and others affected by their work.
What is the difference between a hazard and a risk?
A hazard is anything that may cause harm. The risk is how likely it is that someone could be harmed, and how seriously.
Does a risk assessment have to be written down?
If you employ 5 or more people, you must record the significant findings. HSE says the priority is still to control the risks in practice.
What is a risk assessment at work?
An employer's assessment of the risks their work creates for employees, contractors, visitors and the public, and the controls needed to keep them safe.

Sources checked

Your next step

View the Risk Assessment Training course

£19.99, pay once

View the courseRequest a call back

Or call 020 4652 5904 · Mon to Fri, 9am to 6pm